How To Make Usb Bootable Windows 7 From Dvd

This guide explains how to create a Windows bootable USB drive for the following Windows versions: Windows XP, Windows Vista, Windows 7, Windows 8, Windows eight.ane, Windows 10, andWindows 11.

Creating a bootable USB drive volition allow you to install Windows from the USB bulldoze directly.

To exist able to install Windows from a USB, you lot need have ane of the following:

• the ISO image of the Windows version
• or the original installation disc of the Windows version

If you don't have either, y'all can instead download an EasyRE ISO image that can be made into a bootable USB or CD to restore your PC.

Contents

• 1 Prerequisites
  • ane.1 USB Drive
  • ane.2 BIOS/UEFI configuration
  • ane.3 ISO paradigm
• 2 Create a Windows XP bootable USB
  • ii.1 Using Easy USB Creator two.0
  • 2.2 If you have the installation disc (CD)
• three Create a Windows Vista bootable USB
  • iii.1 If you have the ISO image
    • 3.1.1 Using Like shooting fish in a barrel USB Creator 2.0
    • iii.1.2 Using Windows vii USB/DVD Download Tool
  • 3.two If you lot accept the installation disc (DVD)
• 4 Create a Windows 7 bootable USB
  • four.1 If you accept the ISO image
    • iv.ane.1 Using Piece of cake USB Creator two.0
    • 4.ane.2 Using Windows 7 USB/DVD Download Tool
  • four.2 If you have the installation disc (DVD)
• 5 Create a Windows 8 / viii.1 bootable USB
  • 5.1 If y'all take the ISO image
    • five.ane.ane Using Easy USB Creator 2.0
    • 5.1.two Using Windows vii USB/DVD Download Tool
  • 5.2 If y'all have the installation disc (DVD)
• half-dozen Create a Windows 10 bootable USB
  • six.1 If you have the ISO prototype
    • 6.1.1 Using Easy USB Creator 2.0
    • half dozen.1.2 Using Windows 7 USB/DVD Download Tool
  • half-dozen.2 If y'all take the installation disc (DVD)
• seven Troubleshooting
  • 7.ane Setup cannot find the End User Licensing Agreement (EULA)
  • seven.2 Download Windows 7 USB/DVD Download Tool
  • seven.iii Bootable USB will non kicking
• viii More Information
  • 8.i Support Links
  • 8.2 Applicative Systems

Prerequisites

Before you commencement creating a bootable USB flash bulldoze to install Windows (XP, Vista, 7, 8, 8.ane, 10), you need to make sure that:

• The USB drive is empty and properly formatted
• The USB drive is bootable
• Your BIOS/UEFI is properly configured to boot from the USB flash drive first
• You have the ISO paradigm of Windows XP, Vista, 7, 8 or 8.1. If you have the original Windows installation disc, you can utilise that instead of the ISO image.
• Software needed to write the ISO image to the USB drive or alternatives, such as Like shooting fish in a barrel USB Creator 2.0 past NeoSmart or the Windows 7 USB/DVD Download Tool by Microsoft.

USB Drive

The USB drive you lot want to make bootable should have at least iv GB in bachelor size.

BIOS/UEFI configuration

To make sure that your BIOS/UEFI is configured to boot from a USB drive, follow our Boot from USB drive guide. You need to make sure that:

If a Boot Device card doesn't appear on your screen where the USB drive is plugged-in, bank check the BIOS/UEFI settings. A Boot Device card can look like this, depending on your estimator model and Windows version:

If you are using a new computer with UEFI/EFI, make sure that the Boot Legacy option is enabled:

If y'all're using a calculator with Fast Boot option, make sure that Fast Boot is disabled.

If your BIOS carte du jour doesn't list a USB item in the BIOS settings, it may hateful that it tin't kicking from a USB drive. You lot tin can attempt with the USB drive plugged-in and and then kicking into BIOS directly.

If the item doesn't appear, you demand to use the original Windows installation CD or DVD to install Windows or admission the repair tools.

If you need to use the repair tools of an original Windows installation CD/DVD, y'all can besides use Easy Recovery Essentials (download link) and run Automatic Repair to automatically find and fix boot errors.

Download Easy Recovery Essentials

ISO image

If yous don't accept the ISO image to create the bootable USB drive, you can download an official image from Microsoft's website.

You demand to accept the product (or license) key.

Create a Windows XP bootable USB

Y'all can create a bootable USB bulldoze with Windows XP past following these instructions.

Using Easy USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with just a single click:

Download Easy USB Creator 2.0

To burn Windows XP to a USB drive using Piece of cake USB Creator 2.0, just follow these steps:

1. Download USB Creator 2.0
2. Install Easy USB Creator 2.0
3. Browse the Windows XP ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Drive field
5. Start

Easy USB Creator 2.0 supports both USB two.0 and USB 3.0.

It's uniform with Windows XP, Windows Vista, Windows 7, Windows 8, Windows viii.1, Windows 10 plus the Windows Server editions (2003, 2008, 2012). Y'all must have .Internet Framework two.0 or higher in lodge to utilize Easy USB Creator two.0

If you accept the installation disc (CD)

If you have the original Microsoft Windows XP Professional installation CD, you lot can use the CD to create a bootable USB using PE Builder.

It'south important to have the post-obit before you lot start:

• The Windows Server 2003 SP1 annal. If not, download from Microsoft now: Microsoft Windows Server 2003 Service Pack one (32 bit)
• The PE Builder software (BartPE). If not, download BartPE
• The original CD of Windows XP Professional person, not a Windows XP Home CD.

  A Windows XP Habitation CD will not work.

To create the bootable bulldoze with Windows XP, follow these steps:

1. Boot into the arrangement
2. Download the PE Architect software from http://www.nu2.nu/pebuilder/
3. Install the PE Architect to C:\. The final path should be C:\PEBuilder to make the next steps easier.

Within the PEBuilder folder, create a new folder named SRSP1. This binder's path should exist C:\PEBuilder\SRSP1.

• Download the Windows Server 2003 SP1 annal from http://world wide web.microsoft.com/en-us/download/details.aspx?id=1143…
• Rename the archive downloaded from Microsoft to MS-WS-SP1.exe
• Open Command Prompt. You tin can also open it past typing cmd in the Run dialog box and pressing Enter later on.
• Type the cd control to go to the binder where the MS-WS-SP1.exe file exists:

  cd c:\downloads

  Don't type MS-WS-SP1.exe in the path above. Yous only need to go to the folder where the file exists.

  Supervene upon c:\downloads with the letter of the alphabet of the drive and the directory where the MS-WP-SP1.exe file exists.

• Blazon MS-WS-SP1.exe -x to begin the extraction procedure, press Enter
• Choose to excerpt the files to the same folder, due east.g. c:\downloads:

  

  PEBuilder: Extract Files

• In Command Prompt, you now need to get to the extract binder at the i386 sub-folder.To exercise so, type the same cd command, if yous're still at the c:\downloads folder in Command Prompt and you haven't created a new binder for the extracted files:

  cd i386

  If you created a new folder for the extract files, say Excerpt, in c:\downloads, update the cd command to go to that binder:

  cd c:\downloads\Extract

  Then, type cd i386, press Enter

• Once inside the i386 folder via Control Prompt, type:

  re-create setupldr.bin c:\PEBuilder\SRSP1

  Replace c:\PEBuilder\ with the path where the PE Builder software is installed, if this was changed in previous steps.

• While still in Command Prompt, aggrandize the ramdisk.sys file with this command:

  expand -r ramdisk.sy_ c:\PEBuilder\SRSP1

  Replace c:\PEBuilder\ with the path where the PE Architect software is installed, if this was changed in previous steps.

• Go to My Estimator
• Become to PEBuilder binder
• Become to SRSP1 binder
• Check that you have the 2 files listed there: setupldr.bin and ramdisk.sys

  

  PEBuilder: Check that you have the files copied

• Insert the Windows XP Professional CD in the disk tray
• Launch PE Builder
• Brand the following changes before you click Build:

  

  BartPE: Configuration for Windows XP USB

  • At the Source field, blazon the letter of the drive for the Windows XP CD, e.g. e:\
  • At the Output field, type BartPE
  • Leave the Custom field blank
  • Media output should exist None
• Click Build
• When the build process is complete, click Close
• Go to Command Prompt and so go to the PEBuilder folder by typing the cd control:

  cd c:\PEBuilder

• Type this command (make sure the USB wink drive is not removed) and press Enter:

  pe2usb -f d:

  Replace d: with the letter of the drive where your USB flash drive is loaded.

• Type Yep, when prompted to begin the procedure. Printing Enter later typing Yes.
• Printing whatsoever cardinal to get out the pe2usb process, after the process is consummate
• Safely remove the USB flash drive from the port
• Remove the Windows XP CD from the disk endeavour
• Reboot the organisation to cheque if the USB flash drive is at present bootable with Windows XP Professional person

If your computer doesn't kicking into the USB drive directly, get to Prerequisites > BIOS/UEFI configuration or read the Kick from USB drive guide to configure your BIOS menu to boot from a USB device first.

Create a Windows Vista bootable USB

Depending if you have the ISO image of Windows Vista or the original DVD, you can employ Easy USB Creator 2.0 or the diskpart utility to create the bootable USB.

If you have the ISO image

Using Easy USB Creator 2.0

Piece of cake USB Creator can quickly catechumen the ISO images into bootable USB drives, with merely a unmarried click:

Download Easy USB Creator ii.0

To burn down Windows Vista to a USB drive using Piece of cake USB Creator two.0, simply follow these steps:

1. Download USB Creator 2.0
2. Install Piece of cake USB Creator 2.0
3. Scan the Windows Vista ISO Image to load at the ISO File field
4. Select the destination of your USB Bulldoze at the Destination Drive field
5. Start

Piece of cake USB Creator 2.0 supports both USB 2.0 and USB 3.0.

It's compatible with Windows XP, Windows Vista, Windows seven, Windows viii, Windows eight.one, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must accept .Internet Framework two.0 or college in society to use Piece of cake USB Creator ii.0

Using Windows 7 USB/DVD Download Tool

To create the bootable drive with the Windows 7 USB/DVD Download Tool, follow the steps from Using the Windows vii USB/DVD Download Tool from Windows viii/8.1.

While the proper noun is "Windows 7", you can utilize the tool for Windows Vista systems as well.

If you have the installation disc (DVD)

To create a bootable USB with Windows Vista and install the operating system from that USB drive, follow the steps.

You'll be using the diskpart utility, available in Windows Vista, to make the USB drive bootable. You'll copy the files from the installation disc (DVD) to the USB bulldoze after the diskpart utility process is finished.

The instructions are:

1. Kick your estimator
2. Open Command Prompt and run information technology as Administrator.You can go at Beginning > All Programs Accessories > Command Prompt or type cmd in the search field.To run Command Prompt as Ambassador, correct-click on the Command Prompt item and select Run equally Ambassador.
3. When Command Prompt opens, type this command and press Enter:

   cd c:\windows\system32

   Supplant c:\ with the letter of the commuter where your Windows Vista is installed: C:\, D:\ etc.

4. Insert the USB flash drive in the USB port
5. Type:

   diskpart

6. Press Enter
7. Type:

   listing deejay

8. Press Enter
9. After y'all press Enter for the listing disk command, Control Prompt volition list the drives that are continued to your computer. Notice the USB drive and its corresponding number.

   

   Command Prompt: list disk

10. Then, type this command:

    select disk X

    Where 10 is the number of the USB wink drive listed by Command Prompt.

    The confirmation message should be:

    Disk 1 is at present the selected disk.

11. Press Enter
12. Type clean and press Enter
13. Type create partition principal and press Enter
14. Type select sectionalization 1 and press Enter
15. Type active and press Enter
16. Blazon this command and press Enter afterwards:

    format fs=ntfs

    Information technology may take a few minutes to format the entire USB wink drive, depending on its size. All the same, you tin employ the quick parameter to format the drive more quickly:

    format fs=ntfs quick

17. Type assign, press Enter
18. Blazon exit, press Enter
19. Insert the Windows Vista DVD in the optical drive
20. Become to My Estimator
21. Note the letter of the drive where the Windows Vista DVD is loaded, e.thou. D:\, E:\
22. Go back to Command Prompt and check if the USB wink drive has been formatted
23. When the format procedure is consummate, type this control and press Enter:

    d: cd boot

    Replace D: with the letter of the drive where the Windows Vista DVD is loaded

24. Then type cd boot and press Enter
25. Type this control and press Enter:

    bootsect.exe /nt60 f:

    Where f: is the letter of the drive where your USB wink bulldoze is loaded

26. Copy all files from the Windows Vista DVD on the USB flash drive.To open the contents of the DVD (and non load the splash screen of the Windows Vista DVD), right-click on the drive and click Open up.

If y'all followed the higher up instructions correctly, the USB flash drive should now be bootable with Windows Vista.

You can bank check this by plugging the USB and rebooting the system. To make sure that your computer boots from a USB drive first, and not from the hard deejay, go to BIOS/UEFI configuration.

Create a Windows 7 bootable USB

You can create the bootable USB drive with Windows 7, if:

• you have the ISO image of Windows 7
• or you have the original installation DVD of Windows 7

If y'all take the ISO prototype

Using Piece of cake USB Creator 2.0

Piece of cake USB Creator can quickly convert the ISO images into bootable USB drives, with only a single click:

Download Easy USB Creator ii.0

To burn Windows 7 to a USB drive using Piece of cake USB Creator two.0, simply follow these steps:

1. Download USB Creator two.0
2. Install Easy USB Creator two.0
3. Browse the Windows 7 ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Drive field
5. Showtime

Easy USB Creator ii.0 supports both USB ii.0 and USB three.0.

It's compatible with Windows XP, Windows Vista, Windows 7, Windows eight, Windows eight.ane, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must have .Internet Framework 2.0 or college in society to use Easy USB Creator ii.0

Using Windows 7 USB/DVD Download Tool

The Windows vii USB/DVD Download Tool is available to download and you tin employ it to create a bootable ISO image from the ISO image you purchased and downloaded from Microsoft.

Earlier you continue with these instructions, please make certain that:

• You have the Windows seven USB/DVD Download Tool downloaded. If not, download Windows 7 USB/DVD Download Tool now.
• You have the Windows 7 ISO Image gear up

The instructions are:

1. Download Windows 7 USB/DVD Download Tool from http://wudt.codeplex.com/ and launch it
2. At the Source File field, click Scan and find the Windows seven ISO image on your reckoner and load it

   

   Windows 7 USB/DVD Download Tool: Source File

3. Click Adjacent
4. Select USB Device
5. Select the USB flash bulldoze from the drib down menu
6. Click Begin copying
7. Exit the awarding, when the process is complete

If you have the installation disc (DVD)

Y'all can use a USB flash bulldoze (see Prerequisites for more information) to install Windows 7 from.

To do so, you lot need to make the USB wink bulldoze bootable offset and and so use the original Windows 7 installation disc (DVD) to copy the contents of the DVD to the USB bulldoze.

The diskpart utility, part of Windows 7, will be used.

Follow these steps (similar to Create a Windows Vista bootable USB > If you have an installation disc):

1. First the computer
2. Open Control Prompt as Administrator. Go at Start > All Programs Accessories > correct-click on the Command Prompt item and select Run as Ambassador.
3. Enter the countersign for the Administrator account
4. At Command Prompt, type:

   cd c:\windows\system32

   Replace c:\ with the letter of the driver where your Windows 7 is installed: C:\, D:\ etc.

5. Printing Enter
6. Insert the USB drive that y'all want to make bootable in an bachelor port
7. Type diskpart and press Enter
8. Type list disk and press Enter

   

   Command Prompt: listing disk

9. Find the USB drive and its corresponding number in the listing provided past Command Prompt
10. Type this control and printing Enter:

    select disk 10

    Where X is the number of the USB drive listed by Command Prompt above.

    The confirmation message should exist:

    Disk 1 is now the selected disk.

11. Blazon clean, printing Enter
12. Type create partition principal, press Enter
13. Type select partition 1, press Enter
14. Blazon agile, press Enter
15. Type format fs=ntfs and press Enter.

Yous can use the quick parameter to format the drive more speedily: format fs=ntfs quick

• Insert the Windows 7 DVD and go to My Reckoner. Note the letter of the drive where the DVD is loaded, due east.g. D:\, E:\
• Type assign, printing Enter
• Type exit, press Enter
• Later the format procedure is complete, type this control in Command Prompt and press Enter:

  d: cd boot

  Where d: with the alphabetic character of the bulldoze where the Windows 7 DVD is loaded.

• Type cd kicking, press Enter
• Type this command and printing Enter:

  bootsect.exe /nt60 f:

  Where f: is the letter of the bulldoze where the USB flash drive is loaded

• Open up the contents of the Windows 7 DVD: right-click on the drive and click Open
• Copy all files from the DVD to the USB

Create a Windows viii / viii.i bootable USB

Depending if yous have the ISO epitome of Windows Vista or the original DVD, y'all tin utilize Easy USB Creator 2.0 to create the USB if you have the ISO image or the diskpart utility to create the bootable USB, if you have the DVD.

If y'all accept the ISO image

Using Easy USB Creator 2.0

Piece of cake USB Creator can quickly convert the ISO images into bootable USB drives, with simply a unmarried click:

Download Easy USB Creator 2.0

To burn Windows 8 or 8.1 to a USB drive using Easy USB Creator 2.0, merely follow these steps:

1. Download USB Creator two.0
2. Install Easy USB Creator ii.0
3. Browse the Windows 8 or Windows 8.1 ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Bulldoze field
5. Beginning

Easy USB Creator 2.0 supports both USB two.0 and USB 3.0.

It's compatible with Windows XP, Windows Vista, Windows 7, Windows 8, Windows 8.1, Windows x plus the Windows Server editions (2003, 2008, 2012). You must have .Cyberspace Framework two.0 or higher in society to utilise Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows vii USB/DVD Download Tool is available to download and you can use it to create a bootable ISO epitome from the ISO image you purchased and downloaded from Microsoft.

While the name is "Windows 7", you can use this tool on a Windows 8 or 8.1 organisation too.

Before you continue with these instructions, please make sure that:

• You have the Windows vii USB/DVD Download Tool downloaded. If not, download the Windows 7 USB/DVD Download Tool now.
• You have the Windows eight or eight.1 ISO Epitome ready

The instructions are:

1. Launch the Windows seven USB/DVD Download Tool
2. At the Source File field, click Browse and find the Windows eight or 8.1 ISO image on your computer

   

   Windows 7 USB/DVD Download Tool: Source File

3. Click Adjacent
4. Insert the USB flash drive in an bachelor port on your computer. Brand certain it'south loaded in My Computer.
5. At Step 2, select USB Device to write the ISO image to the USB bulldoze. You can click DVD to write the ISO image to a DVD instead.

   

   Windows 7 USB/DVD Download Tool: Choose Media Type

6. At Footstep iii, select the USB flash drive from the drop down menu. If the drive isn't loaded notwithstanding, y'all can click on the Refresh icon side by side to the drop down carte.
7. Click Begin copying
8. When done, go out the Windows 7 USB/DVD Download Tool

   

   Windows 7 USB/DVD Download Tool: Washed

If yous have the installation disc (DVD)

If you take the original installation disc (DVD) of Microsoft Windows eight or Windows eight.1 you can create a bootable USB drive.

To practise so, follow the steps below:

1. Kicking into Windows 8 or 8.ane
2. Open Command Prompt as Administrator. To do and then, press the and C central to search for cmd. From the search results list, correct-click on Command Prompt
   
3. Click Run every bit ambassador
   
4. Enter the password, when prompted
5. When Command Prompt opens, blazon this control and printing Enter:

   diskpart

6. Insert the USB flash drive in the port
7. Type list deejay, printing Enter

   

   Command Prompt: list disk

8. Identify the number side by side of the USB drive in the list provided by the list disk command
9. Type select disk 10, printing Enter. Replace X with the number of the USB drive listed from to a higher place steps.

   

   Control Prompt: select deejay

   The confirmation message should be:

   Disk 1 is at present the selected disk.

10. Blazon clean, press Enter
11. Type create partition chief, press Enter
12. Type select partition 1, press Enter
13. Type active, printing Enter
14. Blazon format fs=ntfs, printing Enter. To have the USB bulldoze formatted more speedily, add together the quick parameter: format fs=ntfs quick
15. Type assign, printing Enter
16. Type exit, printing Enter
17. Copy the contents of the Windows 8 DVD or 8.1 DVD to the USB flash drive

Create a Windows 10 bootable USB

If y'all have the ISO image

Using Like shooting fish in a barrel USB Creator 2.0

Easy USB Creator can quickly convert the ISO images into bootable USB drives, with merely a single click:

Download Easy USB Creator ii.0

To fire Windows 10 to a USB drive using Easy USB Creator 2.0, simply follow these steps:

1. Download USB Creator two.0
2. Install Easy USB Creator 2.0
3. Browse the Windows 10 ISO Image to load at the ISO File field
4. Select the destination of your USB Drive at the Destination Drive field
5. First

Easy USB Creator ii.0 supports both USB 2.0 and USB 3.0.

It's compatible with Windows XP, Windows Vista, Windows 7, Windows eight, Windows viii.ane, Windows 10 plus the Windows Server editions (2003, 2008, 2012). You must accept .NET Framework 2.0 or college in gild to utilise Easy USB Creator 2.0

Using Windows 7 USB/DVD Download Tool

The Windows 7 USB/DVD Download Tool is available to download and you can use it to create a bootable ISO image from the ISO epitome you lot purchased and downloaded from Microsoft.

While the proper name is "Windows 7", you can utilize this tool on a Windows 10 system too.

Before you proceed with these instructions, please make certain that:

• You lot have the Windows seven USB/DVD Download Tool downloaded. If not, download the Windows 7 USB/DVD Download Tool now.
• You take the Windows ten ISO Image ready

The instructions are:

1. Launch the Windows 7 USB/DVD Download Tool
2. At the Source File field, click Browse and find the Windows 10 ISO epitome on your figurer

   

   Windows 7 USB/DVD Download Tool: Source File

3. Click Adjacent
4. Insert the USB wink drive in an available port on your reckoner. Brand sure it's loaded in My Estimator.
5. At Step 2, select USB Device to write the ISO prototype to the USB bulldoze. Yous can click DVD to write the ISO paradigm to a DVD instead.

   

   Windows 7 USB/DVD Download Tool: Choose Media Type

6. At Step three, select the USB flash bulldoze from the drop down menu. If the bulldoze isn't loaded however, you can click on the Refresh icon next to the drop downwardly bill of fare.
7. Click Begin copying
8. When done, exit the Windows vii USB/DVD Download Tool

   

   Windows 7 USB/DVD Download Tool: Washed

If you have the installation disc (DVD)

If you have the original installation disc (DVD) of Microsoft Windows 10 you can create a bootable USB bulldoze.

To exercise so, follow the steps below:

1. Kicking into Windows 10
2. Open Command Prompt equally Administrator. To do so, press the and C key to search for cmd. From the search results list, make sureControl Prompt is the chosen result than use the "Run as Administrator" choice on the side:
   
3. Enter the password, when prompted
4. When Control Prompt opens, blazon this control and printing Enter:

   diskpart

5. Insert the USB flash drive in the port
6. Type list disk, press Enter

   

   Command Prompt: list disk

7. Identify the number next of the USB drive in the list provided by the list disk control
8. Blazon select disk X, printing Enter. Supercede 10 with the number of the USB drive listed from above steps.

   

   Control Prompt: select deejay

   The confirmation bulletin should be:

   Deejay i is now the selected disk.

9. Blazon clean, press Enter
10. Type create segmentation principal, press Enter
11. Type select segmentation 1, printing Enter
12. Type active, press Enter
13. Type format fs=ntfs, press Enter. To have the USB drive formatted more quickly, add together the quick parameter: format fs=ntfs quick
14. Blazon assign, press Enter
15. Type exit, press Enter
16. Copy the contents of the Windows 10 DVD to the USB flash drive

Troubleshooting

Setup cannot detect the End User Licensing Agreement (EULA)

Yous may receive this mistake when trying to write a Windows (XP, Vista, vii, eight, 8.1) ISO Paradigm to a USB bulldoze and get in bootable:

Setup cannot find the End User Licensing Agreement (EULA) Setup cannot continue.  To Quit, Press F3

If so, the ISO prototype might exist corrupted. In this case, you can try:

• download a new ISO prototype from Microsoft
• employ the original installation disc instead to create the bootable drive (instructions for using the disc instead of the ISO image are available in this guide for all Windows versions)
• use Piece of cake Recovery Essentials if you're looking for accessing repair tools. Run EasyRE'south Automated Repair feature to automatically scan and set up various boot errors. Other features are available.

Download Windows vii USB/DVD Download Tool

To download the Windows 7 USB/DVD Download Tool, go to http://wudt.codeplex.com/.

Bootable USB will not boot

To make certain that the USB drive will kick when starting your computer, make sure that:

• Your BIOS configuration allows USB drives to kicking start and and so kick from hard deejay. Follow the steps from BIOS/UEFI configuration or the our Boot from USB drive guide.

If you created the bootable USB drive using the Windows 7 USB/DVD Download Tool, new computers with UEFI might not kick from the USB as information technology's been formatted using NTFS and not FAT32.

To become around this, follow these steps:

1. After the Windows 7 USB/DVD Download Tool successfully created the bootable USB drive, go to My Computer and copy all contents from the USB drive to a folder on your Desktop

   

   Windows seven USB/DVD Download Tool: Done

2. Right-click on the USB Drive in My Computer and format it as FAT32
3. After the format process is complete, copy all files from the folder yous created on your Desktop back to the USB drive

More Information

Support Links

• Easy Recovery Essentials for Windows – our repair and recovery deejay.

  Information technology's an piece of cake-to-utilise and automated diagnostics disk. Information technology'due south available for Windows eight, Windows 7 and Windows Vista. It's also available for Windows XP and Windows Server.

  Read more at Windows Recovery Disks.

• The NeoSmart Support Forums, fellow member-to-member technical support and troubleshooting.
• Get a discounted price on replacement setup and installation discs: Windows XP, Windows Vista, Windows 7, Windows eight, Windows ten, Windows 11.

Applicable Systems

This Windows-related knowledgebase article applies to the following operating systems:

• Windows XP (all editions)
• Windows Vista (all editions)
• Windows 7 (all editions)
• Windows 8 (all editions)
• Windows 8.i (all editions)
• Windows 10 (all editions)
• Windows xi (all editions)
• Windows Server 2003 (all editions)
• Windows Server 2008 (all editions)
• Windows Server 2012 (all editions)

Propose an edit

Source: https://neosmart.net/wiki/bootable-windows-usb/

Posted by: cunninghamgiceit.blogspot.com

Share this post